浮游菌采樣器的相關操作說明
更新時間:2023-09-28 點擊次數:626
浮游菌采樣器是一種的多孔吸入式塵菌采樣器,根據等速采樣理論設計,采樣直接,采集頭口風速與潔凈室內風速基本一致,能更準確的反映潔凈室內的微生物濃度。使用浮游菌采樣器進行采樣時,帶塵菌空氣高速通過微孔,被均勻撞擊在培養皿內的瓊脂表面,這些活體微生物在瓊脂表面獲得營養均勻和充分,在培養過程中,快速發生動態再水化過程,高速生長,從而更快得出結果。
操作步驟:
1、取下采樣裝置(采樣盤)的蓋子,將制備好的培養皿放入采樣裝置(采樣盤),然后將采樣盤蓋子蓋上。
2、將主機插上電源(AC220V),(目前市面上的空氣浮游菌采樣器是帶有電池的,一般不用插電源,除非在電池電量不足情況下需接外用電源),按下主機上“采樣開始/暫停”鍵,開始進行采樣,空氣浮游菌采樣器使用時,抽氣量到固定數值時會(huì )自動停止抽取。
3、采樣完畢后,空氣浮游菌采樣器使用完成后,顯示屏會(huì )顯示測試結果,如果需要打印結果,請按打印鍵打印即可。
使用注意事項:
1、不能長期接觸腐蝕氣體、液體;
2、采樣開始,操作人員離開現場,以免人體上帶的菌抽入;
3、儀器至少每年校驗一次;
4、搬動時,應避免過大振動,以防內部損壞。
5、采樣器應該充分清潔滅菌。消毒時要把采樣盤的蓋子蓋上,防止液體進入儀器內部造成損壞。